Autonics DPU Series Digital Thyristor Power Controllers

For Bulk requirement, Kindly click on enquiry now button   Product Details: Product Description Brand Autonics Model Number  DPU Series Digital Thyristor Control Phase Single Phase / 3-Phase Rated frequency 50/60Hz (auto recognition), allowable frequency range: ± 2 Hz Min. load Current 1 A Output range  Phase control: 0 to 98% , Z.C. control : 0 to 100% Control Method  Phase control : normal / constant current feedback / constant voltage feedback / constant power feedback Cycle control ( Z.C.) : fixed cycle / variable cycle ON/OFF Control (Z.C.)  digital Input  AUTO / MAN Selectable, RUN / STOP selectable, Reset, Output holding, SP set (SP 1 to 6)  Display Type  Control Input, load voltage, load current, load power, load resistance, Power supply frequency Min. display output Over 2.5% of rated voltage / current RS485 comm. Modbus RTU method Approval  C ∈ EAC Power supply 110 / 220 / 380 / 440 VAC ∼model ( fan and control power 220 VACs∼50/60Hz separately) Allowable voltage range Single-Phase: 90 to 110% of power supply 3-phase: 85 to 115% of power supply Power consumption Single-phase: ≤ 7 W ( except fan power ) 3-phase: ≤10 W ( except fan power ) Display method Display value and setting value display: 7 segment 4-digit State display: Single-phase LED × 4 , 3-phase LED × 6 Display value percentage display: 11 LED bar Dielectric strength Between input terminal and power terminal:2000 VAC∼50/60Hz for 1 min Vibration 0.75 mm double amplitude at frequency of 5 to 55 Hz (for 1 min) in each X,Y,Z direction for 2 hours Insulation resistance  ≥ 200 MΩ (500 VDC= megger) Noise immunity ± 2 kV square waves noise (pulse width: 1μs) by the noise simulator Ambient temp. -10 to 50°C, storage: -20 to 80°C (no freezing or condensation) Ambient humidity 5 to 90%RH, storage: 5 to 90%RH (no freezing or condensation) Above specifications mentioned are for quick reference only. Actual technical details has to be obtained from below catalog.